Year: <span>2009</span>

Year: 2009

Apple, AutoCAD, Autodesk, Fail, Linux, Nostalgia, Thoughts

AutoCAD for Linux – another bad idea

 , , , itemprop="discussionURL"31

I often see calls for Autodesk to support AutoCAD on Linux. Just like AutoCAD for the Mac, while I can sympathise with the users of that OS, I think a native port of AutoCAD for Linux would be a bad idea. Again, I think it would be bad for everybody: Autodesk, AutoCAD for Windows users, and most of all, AutoCAD for Linux users. Why? First of all, for most of the same reasons I gave for the Mac port. Autodesk hasn’t just failed in the past with AutoCAD for the Mac, it has failed with AutoCAD for Unix, too. I …

AU2006, Autodesk University, Other Products, Tip

Go and snag a free Snagit, quick!

 , , , , itemprop="discussionURL"1

For the next few hours, you can get a free registered version of the screen capture software Snagit from TechSmith. It’s a couple of versions old and not supported on Vista, but nevertheless is well worthwhile. No, the Print Scrn key isn’t the same thing at all; Snagit is much, much more useful than that. Try it for yourself, you can thank me later. To get the freebie, first get a registration key by clicking here and then download your copy of Snagit 7.2.5 from here. Be quick, because this offer closes at 5 PM EST (9 PM GMT/UTC) today, …

Apple, AutoCAD, Cadalyst, Nostalgia

AutoCAD for Mac review in Cadalyst (circa 1989)

 , , , itemprop="discussionURL"3

A comment from Kal on Between the Lines mentions an AutoCAD Release 10.5 for Mac. My memory of ancient and useless AutoCAD trivia is usually pretty good, but this time things are a bit foggy and I need some help. I definitely remember there being some kind of half-release of AutoCAD for Mac*, but I’m not sure it was an official designation. I do remember a Cadalyst review at the time, possibly by Art Liddle. I would estimate it to be from 1989, give or take a year. The then-new Mac release reviewed was some kind of hybrid between R10 …

Apple, AutoCAD, Autodesk, Fail, LISP, Microsoft, Nostalgia, Performance, Thoughts

Why AutoCAD for Mac is a bad idea

 , , itemprop="discussionURL"78

There has been a fair bit of open discussion from Autodesk lately on the subject of a possible future OS X AutoCAD version. The more I think about this, the more I am inclined to believe that this would be a bad idea. A very bad idea. It pains me to write this, because I’m very much a user advocate and I’m arguing here against something that some users have been requesting for a long time. If you’re one of those users, I’m sorry, but I think this is one of those cases when giving you what you want would …

AU2009, Autodesk, Autodesk University, Customer Service, Fail, Other Autodesk Products, Other Blogs, Rant, Thoughts

Autodesk’s Revit rebellion reaction

 , , , , , , , , itemprop="discussionURL"11

It’s time to examine how Autodesk has reacted to the widespread criticism of Revit 2010. Is Autodesk listening? To be more specific, is Autodesk’s Revit team listening? The Good It has been good to see extensive public participation by Autodesk people in various discussions in different places. The Revit team isn’t hiding. It is asking for feedback on the Autodesk discussion groups, the AUGI forums and its own blogs, and getting lots of it. Much of it is negative, but it is to Autodesk’s credit that I’m not seeing much in the way of denial, or demands that the criticism …

Fail, Fun, Grammar, Pictures

Clealiness of toliets in schools

 , , , , itemprop="discussionURL"2

This sign was visible for some months at my daughters’ old school: It vanished rather quickly after I was spotted taking a photo of it. My daughters don’t go to that school any more. Instead, they go to the school where I took this photo this morning: Again, the sign vanished almost instantly.

AUGI, Rant

AUGI World’s missing column

 , , itemprop="discussionURL"1

Despite living in troubled times, AUGI is managing to keep its AUGI World publication going, at least in electronic form. The printed edition, which was previously available only in North America, is no longer with us due to printing costs and/or green intentions. It may or may not not return at some later date. AUGI World current and past issues I was happy to note that not only is the current copy available in PDF format, but that previous issues have also been made available in that format. The unpopular NXTBook experiment is over, it seems. Another change you may …

AUGI, Autodesk University, Fun, Pictures

Who is this person?

 , , , itemprop="discussionURL"15

The first person to identify the pixellated personage below will win a virtual doughnut. Bonus sprinkles will be provided if anyone can identify the other people, the event, the location and the year. Picture courtesy of Donnia Tabor-Hanson (CADMama), from this thread in the AUGI Coffee Without CAD forum. I encourage you to read that thread and see if you can contribute to the idea it is promoting, but not until you’ve had a guess here! Readers of that thread and the people appearing in the photo should recuse themselves. Over to you! Edit: lots of right answers (which I’ve …

Hardware, Navel Gazing, Nostalgia

My first computer

 , , , , itemprop="discussionURL"8

My first computer was a Dragon 32, which I think I bought in 1982. With a massive 32 kilobytes of RAM and a proper typewriter keyboard, it was quite advanced for a home computer of the time. The Commodore 64 may have had more RAM, but a lot of it was grabbed by its very basic BASIC. I preferred a computer with an ELSE to go with its IF, thanks. Microsoft Extended BASIC for me, not the crummy old BASIC 2.0 of the Commodore. The Commodore 64 was one of the great consumer electronics sales successes of all time. The …

AutoCAD, AutoCAD 2009, Customer Service, Other Blogs

AutoCAD 2009 Update 3

 , , , , itemprop="discussionURL"6

Update (nee Service Pack) 3 for AutoCAD 2009 is now available. See Between the Lines for full details. As always, read the readme first. Here are the links: Readme AutoCAD 2009 AutoCAD LT 2009 AutoCAD 2009 for Revit Architecture AutoCAD 2009 for Revit Structure No word yet about related updates for the vertical products. While I’m not convinced by some aspects of the recently introduced multiple-update-per-release regime, I do approve of Autodesk continuing to maintain 2009 after 2010 has been released. People have complained about this not being done in the past, and on this score at least, I have …

AUGI

AUGI Board of Directors – election process starts

 , , itemprop="discussionURL"0

The long-awaited election of members of the 2009 AUGI Board of Directors has finally got under way. Nominations are now open and will be until 24 May 2009. To nominate yourself or others, see this page for details. Various announcements have been made about the timing and format of the election events, see the Announcement forum (AUGI members only) for details. It is likely that two positions will be filled by this election and one by Presidential appointment to replace one Board member who resigned, taking the Board to the 6-member minimum. I will be covering the background to this …

Autodesk, Customer Service, Other Autodesk Products, Other Blogs

Revolt of the Revit Ribbon Renegades

 , , , , , , , , itemprop="discussionURL"6

I hesitate to cover this subject because my understanding of Revit is very close to nil. I’m going to cover it anyway, because it relates to the Does Autodesk Listen? theme that I’ve discussed here in the past. Revit 2010 has appeared with a Ribbon interface, and many users don’t like it. Some well-known Revit users, including bloggers, former Autodesk employees and Revit founders, have railed against the new release. Autodesk has been accused of ignoring long-standing wishlists and pre-release feedback. Autodesk has (it is said) wasted precious development resources by introducing a badly-designed and poorly-performing pretty new face at …

AutoCAD 2010, Autodesk, Interoperability, Other Autodesk Products, Raster Design

Network/standalone clash is confined to Raster Design

 , , , itemprop="discussionURL"4

Autodesk has been in touch to confirm that the failure to allow a mixed network/standalone environment is confined to Raster Design. I haven’t yet tested this myself, but I’ve been told unequivocally that you can mix standalone and network license models for the major products. Here is the official Autodesk response to the issue: We are very aware of the issue currently relating to the co-existence of an AutoCAD SLM (stand-alone license) and AutoCAD Raster Design NLM (network license) configuration. This was not an intentional “change of licensing policy” as expressed in some blog posts this week, but an unfortunate …

AutoCAD, AutoCAD 2000, AutoCAD 2007, AutoCAD 2008, AutoCAD 2009, AutoCAD 2010, Bug, Interoperability, Tip

AutoCAD’s magic vanishing attachments

 , , , , , , , , itemprop="discussionURL"1

There are now quite a few file types that you can attach to an AutoCAD drawing as a reference, in the same way that you can attach other drawings as xrefs. We’ve been able to attach other drawings since Release 11 (1990) and images since Release 14 (1997), but every release since 2007 has introduced a new kind of attachment. In AutoCAD 2010, you can now also attach PDFs, MicroStation DGNs (v7 and v8), DWF and DWFx files. But should you? Maybe not. It depends who is going to use those drawings after you. If you know for certain that …

AutoCAD, AutoCAD 2010, Customer Service, Interoperability, Other Autodesk Products, Raster Design

Autodesk plans to fix Raster Design licensing SNAFU

 , , , , itemprop="discussionURL"3

I have been in touch with various people at Autodesk about Raster Design 2010’s failure to work in a mixed standalone/network environment. These people have all been suitably apologetic, they assure me it wasn’t a deliberate move on Autodesk’s part, and that moves are afoot to provide a solution fairly soon. For example: Our intention was never to cause such inconvenience for our Raster customers with the licensing change. We are currently working on a solution and hope to have more information in the coming weeks. And: …we are very aware of the issue currently relating to the co-existence of …

Autodesk, Legal, Other Blogs, Polls

Should you read software license agreements?

 , , , , , itemprop="discussionURL"5

Evan Yares has raised an interesting point about the insolvency clause in Autodesk’s End User License Agreement. Please read the whole thing, but the gist is that there’s a clause where if you get into financial difficulties, Autodesk will do its bit to help you out in times of trouble by taking away your software licenses. This clause extends as far as making an arrangement with your creditors, which is a common enough phrase but can mean several things and isn’t defined within the agreement. So, if your cash flow is a bit tight and you have to ask your phone …

AutoCAD 2010, Customer Service, Interoperability, Other Autodesk Products, Rant, Raster Design

Autodesk messes up Raster Design 2010 licensing

 , , , , , , itemprop="discussionURL"10

I was horrified to learn (in this Autodesk Discussion Group thread) that Autodesk has changed the rules as far as the way Raster Design licenses are handled. It’s quite possible that Autodesk has also done this with other products that I’m not yet aware of. If so, please comment and let me know. If you’re not familiar with Raster Design, it’s an Autodesk add-on that adds raster handling capabilities to AutoCAD and AutoCAD-based products. The change that has been introduced is that the licensing method of AutoCAD and Raster Design now has to match. That is, if your AutoCAD is standalone, …

Navel Gazing, Other Blogs, Review, Thoughts, Writing

Not another SpacePilot PRO review

 , , , , , , , , , itemprop="discussionURL"12

This post is not about the new SpacePilot PRO 3D controller from 3Dconnexion (a division of Logitech). This post is about the Internet coverage of the launch of that new device, journalism, blogging, freebies and ethics. It has long been common practice for companies to give out free stuff to journalists. Free gadgets, free transport and other expenses for attending events, free beer, free lunch… oh, wait, there’s no such thing. As blogging has risen in prominence, that practice has been extended to providing free stuff for bloggers. It was traditional in the past for such freebies to go unmentioned …

AutoCAD, Autodesk, Tip

Autodesk Assistance Program and the educational watermark

 , , , , itemprop="discussionURL"2

You have probably seen blog posts about the Autodesk Assistance Program (see the FAQ PDF), promoted as a hand-up for the less fortunate who find themselves unemployed as a result of the current financial environment. The Autodesk PR makes it clear that the free software on offer is a 13-month student license. However, the consequences of using such software are not made clear, so I’ll spell it out here. If you use Autodesk educational software, you are not supposed to use it for commercial purposes. So, if you’ve just lost your position and were hoping to set yourself up with …