IPoC interview – Lynn Allen – part 1

This is the third in a series of interviews of Interesting People of CAD (IPoC). Lynn Allen is a legendary figure in the CAD world and really needs no introduction. I’m very happy that she agreed to be interviewed for this series. Here is the first part of Lynn’s interview. Topics include life before Autodesk, that AU wig and user groups, especially AUGI. Steve: Can you tell me a little about your background before you started with Autodesk? Have you always been involved in teaching and training? Lynn: I started using AutoCAD with Version 1.4 at American Honda. I then …

IPoC interview – David Kingsley – part 3

Welcome to the second in this series of interviews of Interesting People of CAD (IPoC). David Kingsley has had a long and interesting career, was present in the early days of CAD adoption, and served as an AUGI board member for years. Here is the third and final part of David’s interview. This was the most interesting part of the interview for me, but unfortunately much of the more hilarious anecdotes and other discussions were off the record so I can’t share them. I hope you enjoy what’s left! Steve: What are you most proud of achieving with AUGI? David: …

IPoC interview – David Kingsley – part 2

Welcome to the second in this series of interviews of Interesting People of CAD (IPoC). David Kingsley has had a long and interesting career, was present in the early days of CAD adoption, and served as an AUGI board member for years. Here is the second part of David’s interview which covers his involvement in AUGI, the controversy over how it was managed, and how that ended his involvement. Steve: What was your first involvement with AUGI or NAAUG? At what stage did you get involved? David: I think it was NAAUG in Philadelphia. Paul Jackson came up to me …

IPoC interview – David Kingsley – part 1

Welcome to the second in this series of interviews of Interesting People of CAD (IPoC). David Kingsley has had a long and interesting career, was present in the early days of CAD adoption, and served as an AUGI board member for years. Here is the first part of David’s interview, which covers his career. It’s a long career, so this is a loooong post! Strap in tight for a candid discussion of solar plants, a couple of US Presidents, primeval Autodesk University, Autodesk before and after Lynn Allen, a personal opinion of the current CEO, sailing on an America’s Cup …

AUGI Special Election – voting opens

The AUGI Special Election voting page is now live, and will be open until 12 July 2009. I encourage all AUGI members to carefully consider the candidates and participate in the electoral process. I do not like some of the restrictions that have been placed on this election, but it is the first real election (i.e. with a choice of candidates) that AUGI has had for several years, so please make it a success by taking part.

AUGI Salary Survey – last few days

The annual AUGI Salary Survey (ably run by friend and fellow geek/blogger Melanie Perry) is open for your responses until 30 June,  so if you’re planning to fill it in, please get in soon. There are 19 simple questions on one page, and it only takes a couple of minutes. If you have questions about the survey, read the FAQ. In these troubled times, many of you may find the previous years’ results a valuable resource.

AUGI | AEC EDGE magazine published

More AUGI news, but good news this time. The first edition of the on-line magazine AUGI | AEC EDGE has been published by Extension Media. It is available in high- and low-res PDF format, plus an on-line reader. The first issue has 82 pages of almost entirely Revit articles and is very light on for advertising. That’s good in the short term for readers who prefer editorial content over advertising, but in the long term the advertising ratio will have to ramp up to ensure this publication’s ongoing survival. In the meantime, I commend the advertisers who did contribute to …

AUGI Special Election – Candidates

There are four candidates for two positions on the AUGI Board of Directors. The voting page is now open, although it will not go active until voting commences on 29 June. The candidates are (in alphabetical order): Mark Kiker – Current AUGI President, runs the CADDManager Blog, one of the candidates in the failed election of 2008. Will remain President until end of 2009, regardless of this election result. Kenneth Leary – Prominent contributor on the AUGI Forums (as Augi Doggie), AUGI Training Program Coordinator and AUGI General Survey Manager, runs the autocad power user blog. Marv Muston – Former …

A touch of Tehran taints the AUGI Special Election

Most of you reading this blog are fortunate enough to live in democracies, and can only look on with sympathy at those who are denied the right to choose who represents them. What must it be like to live under regimes where the people are denied basic rights such as a free choice over who governs them? Or under mock-democratic regimes that hold “elections” where the candidates available from which to choose are strictly limited, or where the ruling regime changes the rules of the game to prevent losing its majority, or where the right to comment on the suitability …

AUGI World’s missing column

Despite living in troubled times, AUGI is managing to keep its AUGI World publication going, at least in electronic form. The printed edition, which was previously available only in North America, is no longer with us due to printing costs and/or green intentions. It may or may not not return at some later date. AUGI World current and past issues I was happy to note that not only is the current copy available in PDF format, but that previous issues have also been made available in that format. The unpopular NXTBook experiment is over, it seems. Another change you may …

Who is this person?

The first person to identify the pixellated personage below will win a virtual doughnut. Bonus sprinkles will be provided if anyone can identify the other people, the event, the location and the year. Picture courtesy of Donnia Tabor-Hanson (CADMama), from this thread in the AUGI Coffee Without CAD forum. I encourage you to read that thread and see if you can contribute to the idea it is promoting, but not until you’ve had a guess here! Readers of that thread and the people appearing in the photo should recuse themselves. Over to you! Edit: lots of right answers (which I’ve …

AUGI Board of Directors – election process starts

The long-awaited election of members of the 2009 AUGI Board of Directors has finally got under way. Nominations are now open and will be until 24 May 2009. To nominate yourself or others, see this page for details. Various announcements have been made about the timing and format of the election events, see the Announcement forum (AUGI members only) for details. It is likely that two positions will be filled by this election and one by Presidential appointment to replace one Board member who resigned, taking the Board to the 6-member minimum. I will be covering the background to this …